ACTFLEX 101 UV
high-build, UV-stable, water-based co-polymer waterproofing
High-performance Class III co-polymer waterproofing membrane formulated for exposed applications requiring superior UV resistance and long-term durability.
ACTFLEX 101 UV is a premium Class III co-polymer waterproofing membrane designed for long-term exposure to sunlight, temperature variation, and weathering. Formulated with UV-stabilised polymers, it resists cracking, chalking, and re-emulsification while providing exceptional waterproofing integrity.
The product meets the requirements of AS4654.1 – Waterproofing membranes for external above-ground use, is LOW VOC, and non-hazardous, making it suitable for both residential and commercial use.
specs
Technical Specifications.
Waterproof Time:
Trafficable after 24 hours; full waterproof cure after 14 days
Coverage:
8–10 m² per 15L pail (three coats, total DFT 1.2 mm)
Usable period after opening:
Single-component; ready to use.
Touch dry time minimum:
Tack Free: 6 hours @ 25°C, 50% RH
Recoat: 6 hours
Full Cure: 14 days @ 25°C, 50% RH
Vapor Pressure @ 25oC:
Not a vapor barrier; not suitable for negative pressure applications
Application Temperature:
10°C – 26°C
Shelf Life:
12 months
Membrane
Classification:
Class III (AS/NZS 4858)
Colour:
Grey or White (tintable with up to 1% acrylic tint).
Tack Free Time:
6 Hours at 25°C and 50% R.H
Recoat Time:
6 Hours at 25°C and 50% R.H
Elongation at Break:
450% @ break
Recommended
Thickness:
Exposed walls: 0.8 mm DFT (2 coats)
Roofs & gutters: 1.2 mm DFT (2 coats
Chemical
Resistant:
Full Cure:
14 Days at 25°C and 50% R.H
Chemical Base:
Co-polymer resin emulsion
Cure Mechanism:
Physical film formation through water evaporation
Tear Propagation
Resistance:
8–12 N/mm²
Service
Temperature:
Solid Contents:
65%
Bond Strength:
Excellent adhesion to concrete, render, CFC, plasterboard, and masonry (with primer)
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 8–10 m² per 15L pail (three coats, total DFT 1.2 mm)
Required:
167 Lr
3d
Application Model
