ACTFLEX 929 HV
Class III Certified | High-Build Non-Slump | Root Resistant
Single-component moisture-cured polyurethane membrane for wet areas, roof terraces and planters beneath protected finishes.
ACTFLEX 929 HV delivers 547% control elongation under AS/NZS 4858 and holds its performance through water, bleach and detergent immersion, heat ageing and 50 movement cycles at 4 mm. It cures on atmospheric moisture to a tough elastomer that will not re-emulsify, resists chemicals and corrosive soils, and is ready for mortar beds and screeds 48 hours after the final coat. A 15 L pail covers about 10 m² at 1.2 mm DFT. Use it on retaining walls, bridges, substations and parking decks beneath protection. Not for UV exposure, pools, negative-side pressure or aggressive roots; tile to a screed, not direct to the membrane.
specs
Technical Specifications.
Waterproof Time:
48 hours at 25°C, 50% RH (after final coat).
Coverage:
Approx. 10 m² per 15 L (20 kg) pail at 1.2 mm total DFT
Usable period after opening:
Touch dry time minimum:
Tack-free: 6 h at 25°C, 50% RH; well ventilated
Vapour Pressure @ 25°C:
Application Temperature:
10°C-26°C
Shelf Life:
12 months in unopened containers
Membrane
Classification:
Class III
Colour:
Grey
Tack Free Time:
6 hours @ 25°C, 50% RH.
Recoat Time:
4–6 h; max. 24 h at 25°C, 50% RH; well ventilated
Elongation at Break:
547% (AS/NZS 4858); 511% (AS 4654.1)
Recommended
Thickness:
Minimum 1.2 mm total DFT; min. two coats
Chemical
Resistant:
Chemically resistant; passes water, bleach and detergent immersion (AS/NZS 4858, Report 0242-5).
Full Cure:
48 h at 1.2 mm DFT, 25°C, 50% RH; well ventilated
Chemical Base:
Single-component moisture-cured polyurethane.
Cure Mechanism:
Chemical reaction with atmospheric moisture.
Tear Propagation
Resistance:
Service
Temperature:
Solids Content:
90% ± 2%.
Bond Strength:
30.76 N.
Density:
1.33 kg/L
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
4.15 MPa (AS/NZS 4858); 3.17 MPa (AS 4654.1)
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Approx. 10 m² per 15 L (20 kg) pail at 1.2 mm total DFT
Required:
150 L
pdfs
Product Documentation.
Safety Data Sheet 2 (PDF Download)
Technical Drawings (PDF Download)
3d
Application Model
Available in (sizes)
15 L (20 kg) pail
Need to Know More?
Got a question about ACTFLEX 929 HV? Our technical team can help with specification, surface prep, coverage and compatibility.
Call (02) 8021 3517
Email info@forspec.com.au
