HIFLOW DRAINAGE CELL
HDPE modular drainage cell roll
Geo Synthetic HDPE Dimpled Drainage Roll
HIFLOW DRAINAGE CELL is a high-performance geo-synthetic non-woven dimpled drainage roll manufactured from High Density Polyethylene (HDPE). It is designed to provide efficient sub-surface drainage and hydrostatic pressure relief behind retaining walls, planter boxes, podium decks and green roof systems. The modular dimple design creates a continuous void space, allowing excess water to flow freely through the system while protecting the waterproof membrane beneath.
specs
Technical Specifications.
Waterproof Time:
Installed over cured waterproof membrane
Coverage:
22.5m² per roll (15m x 1.5m)
Usable period after opening:
Immediate once installed and backfilled
Touch dry time minimum:
Not applicable – mechanical drainage system
Vapor Pressure @ 25oC:
Allows free water flow and pressure relief
Application Temperature:
10 - 26°C
Shelf Life:
Membrane
Classification:
Geo-Synthetic Non-Woven Dimpled Drainage System
Colour:
White
Tack Free Time:
Recoat Time:
Elongation at Break:
HDPE flexible sheet system
Recommended
Thickness:
15mm
Chemical
Resistant:
Resistant to chemicals and weathering
Full Cure:
Chemical Base:
Cure Mechanism:
Tear Propagation
Resistance:
Durable HDPE sheet construction
Service
Temperature:
Heat Resistant: 70°C @ 1.5 hours
Solid Contents:
HDPE plastic modular cells
Bond Strength:
Mechanical fixing or adhesive fixing system
Density:
Compressive
Strength:
250 kPa
Flow:
250 kPa
Acceptance of Cyclic Movement:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Dimensional Stability:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Control Elongation at Break:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Control Tensile Strength:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Water Immersion Elongation at Break:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Water Immersion Tensile Strength:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Detergent Immersion Elongation at Break:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Detergent Immersion Tensile Strength:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Heat Aging Elongation at Break:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Heat Aging Tensile Strength:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Field Seam Strength:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Temperature Resistance:
Water Vapour Transmission
>150 (ASTM-4716) i=1.0 @ 100 kPa
Water Vapour Transmission:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Application Method:
>150 (ASTM-4716) i=1.0 @ 100 kPa
VOC Content:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Mixing Ratio:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Viscosity:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Storage Temperature:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Flash Point:
>150 (ASTM-4716) i=1.0 @ 100 kPa
UV Resistance:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Hydrostatic Pressure Resistance:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Water Vapour Transmission Rate (WVTR):
>150 (ASTM-4716) i=1.0 @ 100 kPa
Abrasion Resistance:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Bacterial/Algae Resistance:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Application Time:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Environmental Impact:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Packaging Sizes:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Hardness:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Adhesion to Substrate:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Appearance After Curing:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Clean-up Requirements:
>150 (ASTM-4716) i=1.0 @ 100 kPa
Certification Standards:
>150 (ASTM-4716) i=1.0 @ 100 kPa
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 22.5m² per roll (15m x 1.5m)
Required:
NaN Lr
3d
Application Model
