ACTFLEX Probond 1100PS
PROBOND 1100PS is a versatile two-component epoxy adhesive designed for a broad spectrum of applications, including sealing and forming durable bonds for crack and structural repairs, as well as bonding freshly mixed concrete to hardened concrete on both vertical and horizontal surfaces.
Available in (sizes)
600 ml
concrete repairs
PROBOND 1100PS: The Tough, Versatile Epoxy Adhesive for Concrete Repair and Structural Bonding
This high-viscosity, non-sag epoxy is tougher than concrete and comes in a dual cartridge system for use with a dual cartridge gun and static mixer. It is designed for repairing concrete spalling, cracks, or voids ranging from 1mm to 20mm, making it ideal for riglets in waterproofing applications. Additionally, it effectively restores cracks in concrete, masonry, and various substrates, establishes secure connections between newly poured and cured concrete, fills voids and fissures, and conducts injection-based structural enhancements. PROBOND 1100PS also serves as a binding agent in epoxy mortar formulations, provides anchorage strength for diverse applications, and acts as a binding element in High Friction Surface Treatments (HFST) for concrete, asphalt, and other substrates.
specs
Technical Specifications.
Waterproof Time:
Coverage:
Usable period after opening:
Touch dry time minimum:
Vapor Pressure @ 25oC:
Application Temperature:
5°C-35°C
Shelf Life:
24 months
Membrane
Classification:
N/A
Colour:
Grey
Tack Free Time:
3 to 5 hours at 23°C
Recoat Time:
10hr @ 10°C; 6hr @ 24°C; 3hr @ 30°C
Elongation at Break:
Recommended
Thickness:
Chemical
Resistant:
Full Cure:
10hr @ 10°C; 6hr @ 24°C; 3hr @ 30°C
Chemical Base:
Epoxy
Cure Mechanism:
Chemical reaction
Tear Propagation
Resistance:
Service
Temperature:
-7°C to +50°C
Solid Contents:
Bond Strength:
15.6M Pa @ 2 days; 20.1 MPa @ 14 Days
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
2210 Cps@25°C
Dimensional Stability:
2210 Cps@25°C
Control Elongation at Break:
2210 Cps@25°C
Control Tensile Strength:
2210 Cps@25°C
Water Immersion Elongation at Break:
2210 Cps@25°C
Water Immersion Tensile Strength:
2210 Cps@25°C
Detergent Immersion Elongation at Break:
2210 Cps@25°C
Detergent Immersion Tensile Strength:
2210 Cps@25°C
Heat Aging Elongation at Break:
2210 Cps@25°C
Heat Aging Tensile Strength:
2210 Cps@25°C
Field Seam Strength:
2210 Cps@25°C
Temperature Resistance:
Water Vapour Transmission
2210 Cps@25°C
Water Vapour Transmission:
2210 Cps@25°C
Application Method:
2210 Cps@25°C
VOC Content:
2210 Cps@25°C
Mixing Ratio:
2210 Cps@25°C
Viscosity:
2210 Cps@25°C
Storage Temperature:
2210 Cps@25°C
Flash Point:
2210 Cps@25°C
UV Resistance:
2210 Cps@25°C
Hydrostatic Pressure Resistance:
2210 Cps@25°C
Water Vapour Transmission Rate (WVTR):
2210 Cps@25°C
Abrasion Resistance:
2210 Cps@25°C
Bacterial/Algae Resistance:
2210 Cps@25°C
Application Time:
2210 Cps@25°C
Environmental Impact:
2210 Cps@25°C
Packaging Sizes:
2210 Cps@25°C
Hardness:
2210 Cps@25°C
Adhesion to Substrate:
2210 Cps@25°C
Appearance After Curing:
2210 Cps@25°C
Clean-up Requirements:
2210 Cps@25°C
Certification Standards:
2210 Cps@25°C
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of undefined
Required:
NaN Lr
3d
Application Model
