ACTFLEX ULTRA FC
10–15 Year Service Life • Vehicular Rated
UV-stable polyaspartic topcoat for waterproofing membranes and trafficable coatings.
AACTFLEX ULTRA FC is an ultra-performance, UV-stable, two-component polyaspartic topcoat engineered for use over solvent-based and water-based polyurethane systems.
specs
Technical Specifications.
Waterproof Time:
After full cure (24 hours)
Coverage:
5m² per litre per coat
Usable period after opening:
Light Foot Traffic: 6–12 hours
Full Traffic Resistance: 24 hours
Full Chemical Resistance: 5–7 days
Touch dry time minimum:
Hard Through: 3.5 hours
Vapor Pressure @ 25oC:
ASTM E96 – Pass
Application Temperature:
10°C-30°C
Shelf Life:
9 months
Membrane
Classification:
Two-Component Polyaspartic UV Top Coat
Colour:
Clear or Coloured
Tack Free Time:
2–4 hours
Recoat Time:
6 hours (ensure tack-free)
Elongation at Break:
<100%
Recommended
Thickness:
0.3mm (floor)
0.2mm (wall)
Chemical
Resistant:
Yes – industrial grade
Full Cure:
24 hours @ 25°C 50% RH
Full mechanical resistance: 5–7 days
Chemical Base:
Polyaspartic (Two Component)
Cure Mechanism:
Chemical reaction (Part A + Part B)
Tear Propagation
Resistance:
High puncture and abrasion resistance
Service
Temperature:
Exterior and immersion capable environments
Solid Contents:
90%
Bond Strength:
Excellent adhesion to cured polyurethane membranes
Density:
Compressive
Strength:
Trafficable system rated
Flow:
Trafficable system rated
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 5m² per litre per coat
Required:
12 Lr
3d
Application Model
