ACTFLEX 700 PU PRIMER
Single-component, high-build, moisture-curing polyurethane
High-build, moisture-curing polyurethane primer designed to enhance adhesion between solvent-based waterproofing membranes and joint sealants.
ACTFLEX 700 PU PRIMER is a single-component, high-build, moisture-curing polyurethane primer formulated for maximum adhesion to porous and semi-porous substrates. It is designed specifically for use with Forspec’s solvent-based polyurethane waterproofing membranes and joint sealants.
The product forms a durable intercoat bond, enhancing chemical resistance and waterproof performance while ensuring long-term stability under Forspec membrane systems.
Suitable for new and old concrete, render, masonry, timber, bricks, CFC sheeting, and Villaboard, it can also be used to reactivate or bond existing polyurethane membranes.
specs
Technical Specifications.
Waterproof Time:
3 h at 25°C, 50% RH
Coverage:
4–6 m² per litre depending on surface porosity and application method.
Usable period after opening:
Use within the same day after opening (moisture-reactive system)
Touch dry time minimum:
30 min at 20°C; 15 min at 30°C; both at 50% RH
Vapor Pressure @ 25oC:
3.8 kPa at 25°C
Application Temperature:
10–26°C, ambient and substrate
Shelf Life:
6 Months
Membrane
Classification:
Colour:
Translucent matte, viscous liquid
Tack Free Time:
30 minutes @ 20°C
Recoat Time:
Once touch-dry; max. 24 h. Re-prime if exceeded
Elongation at Break:
Recommended
Thickness:
Nominal 60 µm DFT, one coat
Chemical
Resistant:
Solvent resistance, cured: Good.
Full Cure:
6 hours @ 25°C, 50% RH
Chemical Base:
Single-pack, moisture-curing polyurethane primer.
Cure Mechanism:
Reacts with atmospheric moisture
Tear Propagation
Resistance:
Service
Temperature:
Confirm — no supported TDS value
Solid Contents:
Greater than 30%.
Bond Strength:
Density:
0.80–1.00 g/mL @ 25°C
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Viscous liquid.
Dimensional Stability:
Viscous liquid.
Control Elongation at Break:
Viscous liquid.
Control Tensile Strength:
Viscous liquid.
Water Immersion Elongation at Break:
Viscous liquid.
Water Immersion Tensile Strength:
Viscous liquid.
Detergent Immersion Elongation at Break:
Viscous liquid.
Detergent Immersion Tensile Strength:
Viscous liquid.
Heat Aging Elongation at Break:
Viscous liquid.
Heat Aging Tensile Strength:
Viscous liquid.
Field Seam Strength:
Viscous liquid.
Temperature Resistance:
Water Vapour Transmission
Viscous liquid.
Water Vapour Transmission:
Viscous liquid.
Application Method:
Viscous liquid.
VOC Content:
Viscous liquid.
Mixing Ratio:
Viscous liquid.
Viscosity:
Viscous liquid.
Storage Temperature:
Viscous liquid.
Flash Point:
Viscous liquid.
UV Resistance:
Viscous liquid.
Hydrostatic Pressure Resistance:
Viscous liquid.
Water Vapour Transmission Rate (WVTR):
Viscous liquid.
Abrasion Resistance:
Viscous liquid.
Bacterial/Algae Resistance:
Viscous liquid.
Application Time:
Viscous liquid.
Environmental Impact:
Viscous liquid.
Packaging Sizes:
Viscous liquid.
Hardness:
Viscous liquid.
Adhesion to Substrate:
Viscous liquid.
Appearance After Curing:
Viscous liquid.
Clean-up Requirements:
Viscous liquid.
Certification Standards:
Viscous liquid.
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 4–6 m² per litre depending on surface porosity and application method.
Required:
20 Lr
pdfs
Product Documentation.
Safety Data Sheet 2 (PDF Download)
Compliance Testing Report 1 (PDF Download)
Compliance Testing Report 2 (PDF Download)
Compliance Testing Report 3 (PDF Download)
Low VOC Certificate (PDF Download)
Technical Drawings (PDF Download)
3d
Application Model
