top of page

ACTFLEX 300

​

Primer and Additive in One | Water-Based | Non-Hazardous

Polymer bonding primer that makes FORSPEC levellers, screeds and repair mortars bond to the tack coat, not dust.

ACTFLEX 300 primes dry concrete for FORSPEC LEVELX and LEVELX PRO, is the general-use tack coat beneath FORBUILD 100 and FORCRETE 100, and primes PVC panel walls ahead of ACTFLEX 5000. Gauged into FORCEM SCREED BINDER at 2 L per 20 kg bag, it upgrades density, workability and adhesion, and it is the polymer component of every FORSPEC slurry bond coat. With FIBRE X it enables 5 mm bonded and 35 mm unbonded screed minimums under written FORSPEC approval. A 15 kg pail tack-coats approximately 45–75 m² per coat. Not a standalone waterproofing product and not a primer for FORSPEC butyl sheet membranes; not for substrates above 4.5% moisture.

specs

Technical Specifications.

Waterproof Time:

​

Coverage:

~3–5 m²/kg depending on substrate porosity

Usable period after opening:

​

Touch dry time minimum:

Approx. 1 hour under repair mortars at 25°C, 50% RH

Vapour Pressure @ 25°C:

​

Application Temperature:

5–35°C, ambient and substrate.

Shelf Life:

12 months, unopened, stored at 5–30°C

Membrane
Classification:

​

Colour:

​

Tack Free Time:

Approx. 90 minutes or longer, substrate-dependent (tack-coat use, 25°C, 50% RH)

Recoat Time:

Place topping while primer or slurry remains tacky

Elongation at Break:

​

Recommended
Thickness:

​

Chemical
Resistant:

​

Full Cure:

​

Chemical Base:

Water-based polymer emulsion

Cure Mechanism:

​

Tear Propagation
Resistance:

​

Service
Temperature:

​

Solids Content:

Greater than 8% non-volatile content

Bond Strength:

​

Density:

Approx. 1.0 kg/L (nominal)

Compressive
Strength:

​

Flow:

​

Acceptance of Cyclic Movement:

​

Dimensional Stability:

​

Control Elongation at Break:

​

Control Tensile Strength:

​

Water Immersion Elongation at Break:

​

Water Immersion Tensile Strength:

​

Detergent Immersion Elongation at Break:

​

Detergent Immersion Tensile Strength:

​

Heat Aging Elongation at Break:

​

Heat Aging Tensile Strength:

​

Field Seam Strength:

​

Temperature Resistance:
Water Vapour Transmission

​

Water Vapour Transmission:

​

Application Method:

​

VOC Content:

​

Mixing Ratio:

​

Viscosity:

​

Storage Temperature:

​

Flash Point:

​

UV Resistance:

​

Hydrostatic Pressure Resistance:

​

Water Vapour Transmission Rate (WVTR):

​

Abrasion Resistance:

​

Bacterial/Algae Resistance:

​

Application Time:

​

Environmental Impact:

​

Packaging Sizes:

​

Hardness:

​

Adhesion to Substrate:

​

Appearance After Curing:

​

Clean-up Requirements:

​

Certification Standards:

​

calculator

Coverage Calculator.

100m2

Based on a manufacturers average recommended coverage of ~3–5 m²/kg depending on substrate porosity

Required:

25 kg

pdfs

Product Documentation.

Technical Data Sheet (PDF Download)

Safety Data Sheet 1 (PDF Download)

Safety Data Sheet 2 (PDF Download)

Compliance Testing Report 1 (PDF Download)

Compliance Testing Report 2 (PDF Download)

Compliance Testing Report 3 (PDF Download)

Low VOC Certificate (PDF Download)

Product How To Guide (PDF Download)

Technical Drawings (PDF Download)

3d

Application Model

ACTFLEX 300

locate

Find a Stockist Near You

Company Name

Distance

Address

Phone

ACTFLEX 300

Available in (sizes)

15 kg and 18 kg pails

Need to Know More?

I am a…

Got a question about ACTFLEX 300? Our technical team can help with specification, surface prep, coverage and compatibility.

Call (02) 8021 3517
Email info@forspec.com.au

ACTFLEX 300 GALLERY

bottom of page