(02) 8021 3517 Send your job →
● Range 02 of 7 · the full list

Waterproofing primers & concrete primers

The right primer for the substrate: dry, damp, dusty, PVC or metal. Every FORSPEC system starts here.

10products
4systems
TDS+SDSwhere issued
Spec it →All 10 products ↓
3D drawing: primer coat on a concrete floor and wall, with the membrane started over it
● The whole range

All 10 primers.

Main products first. TDS and SDS open straight from the card.

ACTFLEX 300

ACTFLEX 300

Primer and Additive in One

  • Primer and Additive in One
  • Water-Based
  • Non-Hazardous
TDSSDSView →
ACTFLEX 500 NP

ACTFLEX 500 NP

Solvent-Free

  • Solvent-Free
  • No Acid Etching
  • Holds Vertical and Overhead
TDSSDSView →
ACTFLEX 700 PU

ACTFLEX 700 PU

Touch Dry In 30 Minutes

  • Touch Dry In 30 Minutes
  • One Coat
  • Re-Coats PU Membranes
TDSSDSView →
ACTFLEX 600

ACTFLEX 600

Waterproof in 3 Hours

  • Waterproof in 3 Hours
  • Interlocking Bond
  • Deep Penetration
TDSSDSView →
ACTFLEX 200

ACTFLEX 200

Deep Penetration

  • Deep Penetration
  • Arrests Dusting
  • Tack-Free in 1–2 Hours
TDSSDSView →
ACTFLEX MB200

ACTFLEX MB200

Moisture Barrier to 98% RH

  • Moisture Barrier to 98% RH
  • Fast Curing
  • Solvent-Free
TDSSDSView →
ACTFLEX SUPERBOND 007

ACTFLEX SUPERBOND 007

Bonds Difficult Substrates

  • Bonds Difficult Substrates
  • Tack-Free In Minutes
  • One Coat
TDSSDSView →
ACTFLEX SUPERPRIME 008

ACTFLEX SUPERPRIME 008

Three-Chemistry

  • Three-Chemistry
  • Dry in 5–15 Minutes
  • Extended Open Time
TDSSDSView →
FORZAPRIME

FORZAPRIME

One-Hour Drying

  • One-Hour Drying
  • Binds Dust and Fines
  • FORZAFLEX Primer
TDSSDSView →
All TDS and SDS →Calculators →
● By type

Concrete primers, epoxy primers and membrane primers.

Epoxy primer

ACTFLEX EP 250250 kPa Hydrostatic ResistanceACTFLEX 727 SEP

Concrete primer

ACTFLEX 200Deep PenetrationACTFLEX 500 NPSolvent-FreeACTFLEX MB200Moisture Barrier to 98% RH

Membrane primers

ACTFLEX 600Waterproof in 3 HoursACTFLEX 700 PUTouch Dry In 30 MinutesFORZAPRIMEOne-Hour Drying

Tile and PVC primers

ACTFLEX SUPERBOND 007Bonds Difficult SubstratesACTFLEX SUPERPRIME 008Three-Chemistry
● Where they are used

In 4 FORSPEC systems.

Each system page shows the full build-up these products sit in.

3D drawing: floor and wall tiling build-up, primer, ACTFLEX 989 membrane, SCREED X, BIOSET adhesive, tile and groutTile Adhesives, Grouts & Sealants2 from this range→3D drawing: balcony build-up, membrane under screed and tile, drain at the edgeBalcony & Podium Waterproofing1 from this range→3D drawing: planter box membrane, drainage cell and outletPlanter Box & Green Roof Waterproofing1 from this range→3D drawing: floor build-up showing the screed over the membraneScreeds & Self-Levelling1 from this range→
● 3D models

See every layer before site starts.

Each FORSPEC detail is modelled in 3D so the site team sees the build-up for primers before anyone opens a pail. Send the job and we model yours.

3D model: Primer going down
Primer going downBare concrete, primed, then membrane
3D model: Wet area build-up
Wet area build-upShower, floor and bath · every layer
3D model: Planter box
Planter boxMembrane, drainage cell and outlet
3D of my job →Build the spec →
● CAD library

Drawn details, ready for your set.

5 standard details for primers. Open one to view it and download the PDF and DXF.

Request CAD →Full library →
● The other ranges

Seven ranges. 93 products.

Waterproofing membranesPrimersJointsCrack injectionScreedsTile adhesivesEpoxy flooring
● Not sure it suits the job?

Send us the job. We spec it.

Drawings, photos or a description. A FORSPEC rep comes back with the system, the spec clause, CAD details and a 3D visual within 6 business hours.

Send us your job →Call (02) 8021 3517
Send us your job →☎