ACTFLEX BIOSET
| Extended Open Time | Reduced Slip | Deformable Adhesive
Polymer modified C2TE S1 tile adhesive with extended open time and reduced slip.
ACTFLEX BIOSET is a premium-grade polymer-modified cementitious tile adhesive classified as C2TE S1 in accordance with AS ISO 13007. It is designed for high-performance fixing of ceramic, porcelain, vitrified tiles, and most natural stones in internal and external applications.
The formulation provides improved bond strength (C2), reduced slip for vertical applications (T), extended open time (E), and controlled deformability (S1) to accommodate minor substrate movement. It delivers strong mechanical keying, consistent adhesion, and long-term durability under normal building conditions.
specs
Technical Specifications.
Waterproof Time:
Coverage:
Depends on trowel size and substrate (not specified)
Usable period after opening:
≥ 30 minutes
Touch dry time minimum:
Light traffic: 24 hrs / Full service: 72 hrs
Vapor Pressure @ 25oC:
Application Temperature:
+5°C to +35°C
Shelf Life:
9 monthsv
Membrane
Classification:
Colour:
Grey/White
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Depends on trowel
Chemical
Resistant:
Moderate (cementitious – not specified)
Full Cure:
72 hours
Chemical Base:
Polymer modified cementitious
Cure Mechanism:
Cement hydrationv
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
Bond Strength:
≥ 1.0 MPa
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Non-slump (Reduced slip ≤ 0.5 mm)
Dimensional Stability:
Non-slump (Reduced slip ≤ 0.5 mm)
Control Elongation at Break:
Non-slump (Reduced slip ≤ 0.5 mm)
Control Tensile Strength:
Non-slump (Reduced slip ≤ 0.5 mm)
Water Immersion Elongation at Break:
Non-slump (Reduced slip ≤ 0.5 mm)
Water Immersion Tensile Strength:
Non-slump (Reduced slip ≤ 0.5 mm)
Detergent Immersion Elongation at Break:
Non-slump (Reduced slip ≤ 0.5 mm)
Detergent Immersion Tensile Strength:
Non-slump (Reduced slip ≤ 0.5 mm)
Heat Aging Elongation at Break:
Non-slump (Reduced slip ≤ 0.5 mm)
Heat Aging Tensile Strength:
Non-slump (Reduced slip ≤ 0.5 mm)
Field Seam Strength:
Non-slump (Reduced slip ≤ 0.5 mm)
Temperature Resistance:
Water Vapour Transmission
Non-slump (Reduced slip ≤ 0.5 mm)
Water Vapour Transmission:
Non-slump (Reduced slip ≤ 0.5 mm)
Application Method:
Non-slump (Reduced slip ≤ 0.5 mm)
VOC Content:
Non-slump (Reduced slip ≤ 0.5 mm)
Mixing Ratio:
Non-slump (Reduced slip ≤ 0.5 mm)
Viscosity:
Non-slump (Reduced slip ≤ 0.5 mm)
Storage Temperature:
Non-slump (Reduced slip ≤ 0.5 mm)
Flash Point:
Non-slump (Reduced slip ≤ 0.5 mm)
UV Resistance:
Non-slump (Reduced slip ≤ 0.5 mm)
Hydrostatic Pressure Resistance:
Non-slump (Reduced slip ≤ 0.5 mm)
Water Vapour Transmission Rate (WVTR):
Non-slump (Reduced slip ≤ 0.5 mm)
Abrasion Resistance:
Non-slump (Reduced slip ≤ 0.5 mm)
Bacterial/Algae Resistance:
Non-slump (Reduced slip ≤ 0.5 mm)
Application Time:
Non-slump (Reduced slip ≤ 0.5 mm)
Environmental Impact:
Non-slump (Reduced slip ≤ 0.5 mm)
Packaging Sizes:
Non-slump (Reduced slip ≤ 0.5 mm)
Hardness:
Non-slump (Reduced slip ≤ 0.5 mm)
Adhesion to Substrate:
Non-slump (Reduced slip ≤ 0.5 mm)
Appearance After Curing:
Non-slump (Reduced slip ≤ 0.5 mm)
Clean-up Requirements:
Non-slump (Reduced slip ≤ 0.5 mm)
Certification Standards:
Non-slump (Reduced slip ≤ 0.5 mm)
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Depends on trowel size and substrate (not specified)
Required:
NaN Lr
3d
Application Model
.png)