ACTFLEX HBR
Two Component Epoxy Bonding and Repair Mortar
High-strength epoxy repair mortar designed for structural concrete patching, anchoring, and bonding applications. Features zero-shrink performance, excellent chemical resistance, and durable adhesion for heavy-duty industrial and commercial repairs.
ACTFLEX HBR is a two-component, pre-packed epoxy bonding and repair mortar formulated for structural concrete repair, patching, and anchoring applications requiring high compressive and bond strength. The pre-filled resin system eliminates the need for on-site sand addition, delivering superior adhesion, zero shrinkage, and excellent chemical and impact resistance. Designed for heavy-duty industrial, commercial, and civil repair work, it is suitable for horizontal, vertical, and overhead applications in both internal and external environments.
specs
Technical Specifications.
Waterproof Time:
N/A
Coverage:
1.5 m² per 5 kg kit @ 3 mm thickness
Usable period after opening:
40 minutes at 25°C
Touch dry time minimum:
10–12 hours at 25°C
Vapor Pressure @ 25oC:
N/A
Application Temperature:
15°C – 35°C
Shelf Life:
24 months
Membrane
Classification:
N/A
Colour:
Grey
Tack Free Time:
N/A
Recoat Time:
6–8 hours
Elongation at Break:
N/A
Recommended
Thickness:
20–25 mm per layer
Chemical
Resistant:
Yes
Full Cure:
7 days at 25°C
Chemical Base:
Epoxy
Cure Mechanism:
Two-component chemical cure
Tear Propagation
Resistance:
N/A
Service
Temperature:
N/A
Solid Contents:
Pre-filled epoxy mortar
Bond Strength:
> 2.5 MPa
Density:
1.5 kg/L
Compressive
Strength:
80 MPa
Flow:
80 MPa
Acceptance of Cyclic Movement:
Non-slump
Dimensional Stability:
Non-slump
Control Elongation at Break:
Non-slump
Control Tensile Strength:
Non-slump
Water Immersion Elongation at Break:
Non-slump
Water Immersion Tensile Strength:
Non-slump
Detergent Immersion Elongation at Break:
Non-slump
Detergent Immersion Tensile Strength:
Non-slump
Heat Aging Elongation at Break:
Non-slump
Heat Aging Tensile Strength:
Non-slump
Field Seam Strength:
Non-slump
Temperature Resistance:
Water Vapour Transmission
Non-slump
Water Vapour Transmission:
Non-slump
Application Method:
Non-slump
VOC Content:
Non-slump
Mixing Ratio:
Non-slump
Viscosity:
Non-slump
Storage Temperature:
Non-slump
Flash Point:
Non-slump
UV Resistance:
Non-slump
Hydrostatic Pressure Resistance:
Non-slump
Water Vapour Transmission Rate (WVTR):
Non-slump
Abrasion Resistance:
Non-slump
Bacterial/Algae Resistance:
Non-slump
Application Time:
Non-slump
Environmental Impact:
Non-slump
Packaging Sizes:
Non-slump
Hardness:
Non-slump
Adhesion to Substrate:
Non-slump
Appearance After Curing:
Non-slump
Clean-up Requirements:
Non-slump
Certification Standards:
Non-slump
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 1.5 m² per 5 kg kit @ 3 mm thickness
Required:
NaN Lr
3d
Application Model
