ACTFLEX HYDROPLUG
ACTFLEX HYDROPLUG is a rapid-setting, non-shrink cementitious compound designed to instantly stop active water leaks under pressure. It provides a waterproof seal for leaks in concrete and masonry surfaces, making it ideal for cracks, holes, and penetrations in areas exposed to continuous water ingress.
Available in (sizes)
5kg, 20kg
Rapid-Setting, Non-Shrink Leak Stopper
HYDROPLUG
Formulated for concrete and masonry surfaces, it creates a durable waterproof seal, making it ideal for cracks, holes, and penetrations in areas exposed to continuous water ingress. Its fast-acting and high-strength properties ensure long-lasting protection, making it the perfect solution for basements, tunnels, retaining walls, water tanks, and other below-grade structures.
specs
Technical Specifications.
Waterproof Time:
Instant upon application (fully waterproof within 5-10 minutes)
Coverage:
Varies based on depth & surface; approximately 1 kg covers 0.5 sqm at 2mm thickness
Usable period after opening:
2-3 minutes after mixing
Touch dry time minimum:
Initial set: 1-2 minutes, full dry: 5-10 minutes
Vapor Pressure @ 25oC:
Low permeability, acts as a moisture barrier
Application Temperature:
5°C – 35°C
Shelf Life:
12 months in original, sealed packaging
Membrane
Classification:
Colour:
Cement Grey
Tack Free Time:
1-2 minutes
Recoat Time:
Elongation at Break:
Rigid, non-flexible (0% elongation)
Recommended
Thickness:
Can be applied from 2mm to 50mm in a single layer
Chemical
Resistant:
Resistant to mild acids, alkalis, and salts
Full Cure:
24 hours for maximum strength
Chemical Base:
Cementitious blend with special polymers
Cure Mechanism:
Hydraulic setting reaction
Tear Propagation
Resistance:
High impact and tear resistance
Service
Temperature:
-20°C to 80°C
Solid Contents:
100% (fully solid upon curing)
Bond Strength:
≥ 2.0 MPa (concrete failure mode)
Density:
1.8 – 2.0 g/cm³
Compressive
Strength:
≥ 40 MPa at 28 days
Flow:
≥ 40 MPa at 28 days
Acceptance of Cyclic Movement:
Non-flowable, stiff consistency for vertical and overhead applications
Dimensional Stability:
Non-flowable, stiff consistency for vertical and overhead applications
Control Elongation at Break:
Non-flowable, stiff consistency for vertical and overhead applications
Control Tensile Strength:
Non-flowable, stiff consistency for vertical and overhead applications
Water Immersion Elongation at Break:
Non-flowable, stiff consistency for vertical and overhead applications
Water Immersion Tensile Strength:
Non-flowable, stiff consistency for vertical and overhead applications
Detergent Immersion Elongation at Break:
Non-flowable, stiff consistency for vertical and overhead applications
Detergent Immersion Tensile Strength:
Non-flowable, stiff consistency for vertical and overhead applications
Heat Aging Elongation at Break:
Non-flowable, stiff consistency for vertical and overhead applications
Heat Aging Tensile Strength:
Non-flowable, stiff consistency for vertical and overhead applications
Field Seam Strength:
Non-flowable, stiff consistency for vertical and overhead applications
Temperature Resistance:
Water Vapour Transmission
Non-flowable, stiff consistency for vertical and overhead applications
Water Vapour Transmission:
Non-flowable, stiff consistency for vertical and overhead applications
Application Method:
Non-flowable, stiff consistency for vertical and overhead applications
VOC Content:
Non-flowable, stiff consistency for vertical and overhead applications
Mixing Ratio:
Non-flowable, stiff consistency for vertical and overhead applications
Viscosity:
Non-flowable, stiff consistency for vertical and overhead applications
Storage Temperature:
Non-flowable, stiff consistency for vertical and overhead applications
Flash Point:
Non-flowable, stiff consistency for vertical and overhead applications
UV Resistance:
Non-flowable, stiff consistency for vertical and overhead applications
Hydrostatic Pressure Resistance:
Non-flowable, stiff consistency for vertical and overhead applications
Water Vapour Transmission Rate (WVTR):
Non-flowable, stiff consistency for vertical and overhead applications
Abrasion Resistance:
Non-flowable, stiff consistency for vertical and overhead applications
Bacterial/Algae Resistance:
Non-flowable, stiff consistency for vertical and overhead applications
Application Time:
Non-flowable, stiff consistency for vertical and overhead applications
Environmental Impact:
Non-flowable, stiff consistency for vertical and overhead applications
Packaging Sizes:
Non-flowable, stiff consistency for vertical and overhead applications
Hardness:
Non-flowable, stiff consistency for vertical and overhead applications
Adhesion to Substrate:
Non-flowable, stiff consistency for vertical and overhead applications
Appearance After Curing:
Non-flowable, stiff consistency for vertical and overhead applications
Clean-up Requirements:
Non-flowable, stiff consistency for vertical and overhead applications
Certification Standards:
Non-flowable, stiff consistency for vertical and overhead applications
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Varies based on depth & surface; approximately 1 kg covers 0.5 sqm at 2mm thickness
Required:
NaN Lr
3d
Application Model
.png)