ACTFLEX SA TAPE
Self-Adhesive Butyl Sealing Tape with Fleece Membrane-Bonding Face
Self-adhesive butyl tape with fleece face for membrane-detail sealing.
ACTFLEX SA TAPE is a self-adhesive butyl sealing tape with a white polypropylene fleece face for direct integration into FORSPEC liquid waterproofing systems. Its butyl underside adheres to concrete, screed, render, AAC, fibre cement, metals, masonry, PVC, rigid plastics, timber, glass and bitumen, while the fleece face provides a mechanically keyed surface for the liquid membrane. The tape is used for wall-to-floor and wall-to-wall junctions, pipe and service penetrations, floor waste flanges, taps, outlets, precast panel joints, slab edges, shower recesses, balconies, planter boxes and membrane termination detailing. It is not a standalone waterproofing product and must be covered by the approved membrane system.
specs
Technical Specifications.
Waterproof Time:
Immediate adhesion on pressure rolling; no cure period. Membrane cure and flood testing are governed by the specified membrane TDS.
Coverage:
20 m per roll. Six rolls per carton: 120 linear metres per carton.
Usable period after opening:
No pot life. Apply immediately after removing the release liner.
Touch dry time minimum:
No cure period.
Vapor Pressure @ 25oC:
Water vapour transmission: < 0.1 g/m²/day.
Application Temperature:
0°C to +40°C, ambient and substrate.
Shelf Life:
24 months from date of manufacture, unopened, stored dry and shaded.
Membrane
Classification:
Colour:
Black butyl tape with white polypropylene fleece face.
Tack Free Time:
Immediate permanent tack on pressure rolling.
Recoat Time:
Apply the approved membrane immediately after installation.
Elongation at Break:
> 300% at break.
Recommended
Thickness:
1.0 mm.
Chemical
Resistant:
Full Cure:
No cure period.
Chemical Base:
Butyl sealing tape with white polypropylene fleece face.
Cure Mechanism:
Tear Propagation
Resistance:
Service
Temperature:
−40°C to +100°C.
Solid Contents:
Bond Strength:
Peel adhesion: 22 N/cm.
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 20 m per roll. Six rolls per carton: 120 linear metres per carton.
Required:
100 Lr
pdfs
Product Documentation.
Safety Data Sheet 1 (PDF Download)
Safety Data Sheet 2 (PDF Download)
Compliance Testing Report 1 (PDF Download)
Compliance Testing Report 2 (PDF Download)
Compliance Testing Report 3 (PDF Download)
Low VOC Certificate (PDF Download)
Product How To Guide (PDF Download)
3d
Application Model
