top of page

FORSPEC FIBRE X

​

Alkali Resistant | Plastic Shrinkage Control | Non-Corrosive

Fibreglass reinforcement fibre that protects screeds, mortars and renders through their full depth against early cracking.

Added dry at batching, FORSPEC FIBRE X disperses into a three-dimensional network that intercepts micro-cracks as they form while the mix is still green, before conventional reinforcement carries any load. It also improves toughness, impact resistance, flexural performance and cohesion, and reduces water penetration. Dose at 1 kg per tonne of dry mix for standard crack control, or 1.5–2.0 kg per tonne for enhanced performance (30–40 g per 20 kg SCREEDX bag). It is the specified fibre for FORSPEC SCREEDX and FORCEM SCREED BINDER, needs no special mixing equipment and comes in 1 kg packs. Not a structural reinforcement, and does not replace movement joints.

specs

Technical Specifications.

Waterproof Time:

Governed by the host mix.

Coverage:

Standard dosage: 1 kg per tonne of dry mix (20 g per 20 kg mix). Enhanced dosage: 1.5–2.0 kg per tonne of dry mix (30–40 g per 20 kg mix).

Usable period after opening:

​

Touch dry time minimum:

Governed by the host mix; FIBRE X does not alter drying time.

Vapour Pressure @ 25°C:

​

Application Temperature:

5°C to 35°C

Shelf Life:

36 months

Membrane
Classification:

​

Colour:

White

Tack Free Time:

​

Recoat Time:

Governed by the host mix.

Elongation at Break:

​

Recommended
Thickness:

​

Chemical
Resistant:

Excellent

Full Cure:

Governed by the host mix.

Chemical Base:

Alkali Resistant Fibreglass

Cure Mechanism:

​

Tear Propagation
Resistance:

​

Service
Temperature:

​

Solids Content:

​

Bond Strength:

​

Density:

Approx. 2.6 g/cm³

Compressive
Strength:

​

Flow:

​

Acceptance of Cyclic Movement:

​

Dimensional Stability:

​

Control Elongation at Break:

​

Control Tensile Strength:

​

Water Immersion Elongation at Break:

​

Water Immersion Tensile Strength:

​

Detergent Immersion Elongation at Break:

​

Detergent Immersion Tensile Strength:

​

Heat Aging Elongation at Break:

​

Heat Aging Tensile Strength:

​

Field Seam Strength:

​

Temperature Resistance:
Water Vapour Transmission

​

Water Vapour Transmission:

​

Application Method:

​

VOC Content:

Not applicable — dry inorganic fibre containing no volatile organic compounds

Mixing Ratio:

​

Viscosity:

​

Storage Temperature:

​

Flash Point:

​

UV Resistance:

​

Hydrostatic Pressure Resistance:

​

Water Vapour Transmission Rate (WVTR):

​

Abrasion Resistance:

​

Bacterial/Algae Resistance:

​

Application Time:

​

Environmental Impact:

​

Packaging Sizes:

​

Hardness:

​

Adhesion to Substrate:

​

Appearance After Curing:

​

Clean-up Requirements:

​

Certification Standards:

​

calculator

Coverage Calculator.

100m2

Based on a manufacturers average recommended coverage of Standard dosage: 1 kg per tonne of dry mix (20 g per 20 kg mix). Enhanced dosage: 1.5–2.0 kg per tonne of dry mix (30–40 g per 20 kg mix).

Required:

NaN

pdfs

Product Documentation.

Technical Data Sheet (PDF Download)

Safety Data Sheet 1 (PDF Download)

Safety Data Sheet 2 (PDF Download)

Compliance Testing Report 1 (PDF Download)

Compliance Testing Report 2 (PDF Download)

Compliance Testing Report 3 (PDF Download)

Low VOC Certificate (PDF Download)

Product How To Guide (PDF Download)

Technical Drawings (PDF Download)

3d

Application Model

FORSPEC FIBRE X

locate

Find a Stockist Near You

Company Name

Distance

Address

Phone

FORSPEC FIBRE X

Available in (sizes)

1KG

Need to Know More?

I am a…

Got a question about FORSPEC FIBRE X? Our technical team can help with specification, surface prep, coverage and compatibility.

Call (02) 8021 3517
Email info@forspec.com.au

FORSPEC FIBRE X GALLERY

bottom of page