FORZAPRIME
FORZAPRIME
Fast-drying bituminous primer engineered for superior membrane adhesion and long-lasting waterproofing system performance.
FORZAPRIME is a premium-grade solvent-based bituminous primer formulated to enhance adhesion between substrates and torch-applied waterproofing membranes. Manufactured using modified bitumen, fast-evaporating solvents, and advanced adhesion-promoting additives, FORZAPRIME seals porous surfaces, binds residual dust, and prepares substrates for high-performance waterproofing membrane installation. Suitable for roof slabs, balconies, podiums, retaining walls, foundations, and below-ground structures, FORZAPRIME delivers reliable bonding performance in demanding commercial and residential waterproofing applications.
specs
Technical Specifications.
Waterproof Time:
System dependent after membrane installation
Coverage:
Approx. 4–6m² per litre depending on substrate porosity
Usable period after opening:
Ready to use
Touch dry time minimum:
Minimum 1 hour
Vapor Pressure @ 25oC:
Solvent-based
Application Temperature:
5°C to 35°C
Shelf Life:
Up to 5 years
Membrane
Classification:
Primer / Adhesion Promoter
Colour:
Brown
Tack Free Time:
Approx. 1 hour
Recoat Time:
Once fully dry
Elongation at Break:
Not Applicable
Recommended
Thickness:
Thin film primer coat
Chemical
Resistant:
Resistant to moisture and common site contaminants
Full Cure:
24 hours
Chemical Base:
Modified Bitumen
Cure Mechanism:
Solvent Evaporation
Tear Propagation
Resistance:
NA
Service
Temperature:
-10°C to 80°C
Solid Contents:
Approx. 35%
Bond Strength:
High adhesion promoter
Density:
Approx. 0.91kg/L
Compressive
Strength:
NA
Flow:
NA
Acceptance of Cyclic Movement:
Low viscosity liquid
Dimensional Stability:
Low viscosity liquid
Control Elongation at Break:
Low viscosity liquid
Control Tensile Strength:
Low viscosity liquid
Water Immersion Elongation at Break:
Low viscosity liquid
Water Immersion Tensile Strength:
Low viscosity liquid
Detergent Immersion Elongation at Break:
Low viscosity liquid
Detergent Immersion Tensile Strength:
Low viscosity liquid
Heat Aging Elongation at Break:
Low viscosity liquid
Heat Aging Tensile Strength:
Low viscosity liquid
Field Seam Strength:
Low viscosity liquid
Temperature Resistance:
Water Vapour Transmission
Low viscosity liquid
Water Vapour Transmission:
Low viscosity liquid
Application Method:
Low viscosity liquid
VOC Content:
Low viscosity liquid
Mixing Ratio:
Low viscosity liquid
Viscosity:
Low viscosity liquid
Storage Temperature:
Low viscosity liquid
Flash Point:
Low viscosity liquid
UV Resistance:
Low viscosity liquid
Hydrostatic Pressure Resistance:
Low viscosity liquid
Water Vapour Transmission Rate (WVTR):
Low viscosity liquid
Abrasion Resistance:
Low viscosity liquid
Bacterial/Algae Resistance:
Low viscosity liquid
Application Time:
Low viscosity liquid
Environmental Impact:
Low viscosity liquid
Packaging Sizes:
Low viscosity liquid
Hardness:
Low viscosity liquid
Adhesion to Substrate:
Low viscosity liquid
Appearance After Curing:
Low viscosity liquid
Clean-up Requirements:
Low viscosity liquid
Certification Standards:
Low viscosity liquid
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Approx. 4–6m² per litre depending on substrate porosity
Required:
400 Lr
3d
Application Model
