PREBAR PVC WATERSTOP L-PIECE INTERNAL
90° Internal Corner | Factory Formed | Heat Weldable
Prefabricated fitting that links two PREBAR PVC WATERSTOP runs at internal concrete corners with a consistent junction.
Hand-cutting an internal corner on site is a detail where waterstops typically fail; this fitting replaces it with a precision-made unit. Each leg is welded to the adjoining PREBAR roll at approximately 190–200°C, and every weld is inspected for full fusion, alignment and voids before the pour. The PREBAR PVC WATERSTOP profile it connects is tested to BS 2782 at 330% elongation and 75 Shore A hardness, accommodating joint movement and hydrostatic pressure. Suited to basements, lift pits, retaining walls and water tanks, where it minimises site fabrication. Not a waterproofing membrane: it must be fully encased in concrete with design cover on both sides.
specs
Technical Specifications.
Waterproof Time:
Coverage:
One unit per internal corner
Usable period after opening:
Touch dry time minimum:
Vapour Pressure @ 25°C:
Application Temperature:
Shelf Life:
Membrane
Classification:
Colour:
Blue
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Chemical
Resistant:
Full Cure:
Chemical Base:
PVC
Cure Mechanism:
Tear Propagation
Resistance:
Service
Temperature:
Solids Content:
Bond Strength:
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of One unit per internal corner
Required:
NaN
pdfs
Product Documentation.
Safety Data Sheet 1 (PDF Download)
Safety Data Sheet 2 (PDF Download)
Compliance Testing Report 1 (PDF Download)
Compliance Testing Report 2 (PDF Download)
Compliance Testing Report 3 (PDF Download)
Low VOC Certificate (PDF Download)
Technical Drawings (PDF Download)
3d
Application Model


Available in (sizes)
150mm, 250mm
Need to Know More?
Got a question about PREBAR PVC WATERSTOP L-PIECE INTERNAL? Our technical team can help with specification, surface prep, coverage and compatibility.
Call (02) 8021 3517
Email info@forspec.com.au

