PREBAR PVC WATERSTOP L-PIECE VERTICAL INTERNAL
PREBAR L-Piece Vertical
factory-fabricated corner transition designed for locations where PREBAR PVC Waterstop changes direction between horizontal and vertical planes
PREBAR PVC WATERSTOP L-PIECE VERTICAL is a factory-fabricated corner transition designed for locations where PREBAR PVC Waterstop changes direction between horizontal and vertical planes. It provides a consistent and watertight junction while reducing difficult on-site fabrication. The fitting is heat welded directly to compatible PREBAR PVC Waterstop rolls using hot-air welding equipment and is suitable for basements, retaining walls, lift pits, water tanks and other concrete structures.
specs
Technical Specifications.
Waterproof Time:
Coverage:
One fitting per horizontal-to-vertical waterstop transition.
Usable period after opening:
Touch dry time minimum:
Vapor Pressure @ 25oC:
Application Temperature:
Shelf Life:
Membrane
Classification:
Colour:
Blue
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Chemical
Resistant:
Full Cure:
Chemical Base:
PVC
Cure Mechanism:
Heat welded to PREBAR PVC Waterstop rolls
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
Bond Strength:
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of One fitting per horizontal-to-vertical waterstop transition.
Required:
NaN Lr
3d
Application Model
