SCREED X Engineered Screed
engineered Screed
high-performance, fast-drying structural screed
ScreedX Rapid Screed is a high-performance, fast-drying structural screed designed for bonded, unbonded, and floating screeds. With MineralCore™ Technology, ScreedX Rapid Screed delivers rapid strength gain, walkability in 2–3 hours, and tile readiness in just 12 hours. Ideal for commercial and domestic applications, ScreedX Rapid Screed ensures dimensional stability, compatibility with underfloor heating, and excellent shrinkage resistance.
specs
Technical Specifications.
Waterproof Time:
Waterproof membranes can be applied after 24 hour
Coverage:
16–18 kg/m² per cm thickness
Usable period after opening:
Walkable in 2–3 hours
Touch dry time minimum:
Tiles: 12 hrs
Membranes: 24 hrs
Resilient: 24 hrs
Timber: 5 days
Vapor Pressure @ 25oC:
Moisture after 24 hrs: <3%
Application Temperature:
5°C – 30°C
Shelf Life:
12 Months
Membrane
Classification:
Colour:
Grey
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Bonded: min. 10 mm
Unbonded: min. 40 mm
Floating: min. 45 mm
Chemical
Resistant:
Full Cure:
28 days to reach 30 MPa compressive strength
Chemical Base:
Cement-based, mineral-reinforced
Cure Mechanism:
Hydraulic cement reaction (via water addition)
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
Bond Strength:
Requires substrate pull strength ≥1.5 MPa; improves with slurry coat and ACTFLEX 300
Density:
Compressive
Strength:
17 MPa @ 1 day
25 MPa @ 7 days
30 MPa @ 28 days
Flow:
17 MPa @ 1 day
25 MPa @ 7 days
30 MPa @ 28 days
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 16–18 kg/m² per cm thickness
Required:
NaN Lr
3d
Application Model
%20(3).png)
