Skip to content

(02) 8021 3517 Send your job →

● FORSPEC News · topic

On site. Jobs, methods, training.

What is going in on site: lift pits, basements, pools, bathrooms and joints, with the method and the figures from the data sheet.

11 stories so far

Two concrete tanks wrapped in blue ACTFLEX 5000 self-adhesive sheet membrane, starter bars above the walls and a crane behind

Two concrete tanks wrapped in ACTFLEX 5000On site11 Nov 20261 min read

Lift pit lined in grey PREFLEX 3000 pre-applied sheet membrane, with sealed pile heads and starter bars standing up through the sheet

A lift pit lined with PREFLEX 3000 before the pourOn site11 Nov 20261 min read

FORSPEC drawing of a bathroom floor with the sheet membrane under the screed and the wall membrane brought down over the sheet

The membrane under the screed, on every floorOn site9 Nov 20261 min read

FORSPEC drawing of a pool wall to floor junction: 35 by 35 mm cove, bandage bedded in the first coat, three coats of membrane

A pool detailed the right way in ACTFLEX 988 CWPOn site8 Nov 20261 min read

FORSPEC drawing of a pipe penetration through a sheet membrane floor with the detail piece welded to the floor sheet

Every pipe detail welded into the sheetOn site5 Nov 20261 min read A bathroom floor ready to tile in an hourOn site4 Nov 20261 min read A concrete pool in ACTFLEX 988 CWPOn site4 Nov 20261 min read The waterproofing practical is full; so is 17 NovemberOn site3 Nov 20261 min read ACTFLEX 5000 under a secondary slabOn site2 Nov 20261 min read PREFLEX 3000 before the basement slab pourOn site1 Nov 20261 min read

FORSPEC drawing of a movement joint: joint tape bonded at its edges in epoxy, centre left free, membrane lapped onto each edge

Movement joints: how a joint is sealedOn site21 Oct 20261 min read

● The FORSPEC Brief · monthly

The month in waterproofing. In one email.

Code and standards changes, new products, new test reports and jobs from site. Once a month. No sales emails.

Use it on the job

Products and systemsThe twelve FORSPEC systems DrawingsStandard details, PDF and DXF Technical dataEvery TDS, SDS and test report CalculatorsHow much do I need?TrainingCourses and dates ProjectsReal FORSPEC jobs

● Your job next

Got a job on the go?

Send the drawings or a few photos. FORSPEC comes back with the system, the details and the products for your job, within 6 business hours.

Send us your job →Call (02) 8021 3517

Send us your job →☎