ACTFLEX Flextape
Thermoplastic Elastomer Waterproofing Tape
Elastomer waterproofing tape engineered for sealing joints.
ACTFLEX FLEXTAPE 120mm x 20m is a felt-backed, thermoplastic elastomer waterproofing tape engineered for sealing joints, cracks, and floor-to-wall junctions. Designed for high elongation and seamless membrane integration, ACTFLEX FLEXTAPE 120mm x 20m embeds into polyurethane, acrylic, and cementitious membranes without floating or delamination. Ideal for internal wet areas, balconies, rooftops, and concrete transitions, ACTFLEX FLEXTAPE 120mm x 20m provides durable reinforcement with fast embedment and strong chemical resistance.
specs
Technical Specifications.
Waterproof Time:
Waterproof after membrane top coat cures (24–48 hrs typical)
Coverage:
1 metre per linear metre of joint
Usable period after opening:
12 months sealed in dry, shaded storage
Touch dry time minimum:
Governed by the membrane system in which the tape is embedded.
Vapor Pressure @ 25oC:
Impermeable once encapsulated
Application Temperature:
Shelf Life:
24 months, unopened, stored dry and shaded.
Membrane
Classification:
Colour:
Blue TPE with white felt backing
Tack Free Time:
Recoat Time:
Apply the second coat after the base coat has partially set, in accordance with the membrane TDS.
Elongation at Break:
300% transverse
Recommended
Thickness:
0.7 mm (±0.1 mm)
Chemical
Resistant:
Yes – resists weak acids, alkalis, salts
Full Cure:
Governed by the membrane system in which the tape is embedded.
Chemical Base:
Thermoplastic elastomer (TPE) with felt
Cure Mechanism:
Tear Propagation
Resistance:
≥6 N/mm
Service
Temperature:
−30°C to +90°C. The TDS notes this value was restored to the service-temperature row from the source data.
Solid Contents:
100% solid material
Bond Strength:
Density:
~1.2 g/cm³
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 1 metre per linear metre of joint
Required:
2 Lr
pdfs
Product Documentation.
Safety Data Sheet 2 (PDF Download)
Compliance Testing Report 1 (PDF Download)
Compliance Testing Report 2 (PDF Download)
Compliance Testing Report 3 (PDF Download)
Low VOC Certificate (PDF Download)
Product How To Guide (PDF Download)
3d
Application Model
