ACTFLEX Meshtape
mesh-reinforced, flexible waterproofing joint tape
Joint tape designed for full embedment into thick-bodied membranes.
ACTFLEX MESHTAPE 120mm x 20m is a mesh-reinforced, flexible waterproofing joint tape designed for full embedment into thick-bodied membranes. Featuring a central elastomeric core and high-porosity mesh wings, ACTFLEX MESHTAPE 120mm x 20m allows liquid membranes to saturate fully, forming a mechanical lock to the substrate. Suitable for wall-floor junctions, expansion joints, slab edges, and precast seams, ACTFLEX MESHTAPE 120mm x 20m is compatible with cementitious, acrylic, polyurethane, and polyurea membranes.
specs
Technical Specifications.
Waterproof Time:
Coverage:
1 metre per linear metre of crack or joint
Usable period after opening:
12 months (stored in dry, sealed conditions)
Touch dry time minimum:
Follows membrane cycle – usually 4 to 8 hrs per layer
Vapor Pressure @ 25oC:
Impermeable after proper embedment
Application Temperature:
+5°C to +40°C
Shelf Life:
24 months (sealed, dry conditions)
Membrane
Classification:
Colour:
White open-weave polyester mesh
Tack Free Time:
Recoat Time:
Elongation at Break:
300%+
Recommended
Thickness:
Approx. 0.5 mm (mesh profile), 0.7mm Tape Profile
Chemical
Resistant:
Yes – compatible with all Forspec membranes and resists diluted chemicals
Full Cure:
Chemical Base:
Cure Mechanism:
Tear Propagation
Resistance:
76 MPa tensile strength (longitudinal), moderate flexibility
Service
Temperature:
Solid Contents:
100% solid mesh strip
Bond Strength:
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 1 metre per linear metre of crack or joint
Required:
NaN Lr
3d
Application Model
_edited.png)