top of page
PREBAR PVC WATERSTOP
heat-weldable technology, this durable and chemical-resistant system
ideal for both water-retaining and water-excluding structures.
Prebar PVC Waterstop is a high-performance thermoplastic PVC profile designed for watertight sealing in cast-in-situ concrete joints. Compliant with BS 2782, it suits both construction and expansion joints in horizontal and vertical applications.
specs
Technical Specifications.
Waterproof Time:
Coverage:
250mm x 12.5m, 150mm x 15m
Usable period after opening:
Touch dry time minimum:
Vapor Pressure @ 25oC:
Application Temperature:
Shelf Life:
Membrane
Classification:
Colour:
Blue
Tack Free Time:
Recoat Time:
Elongation at Break:
330%
Recommended
Thickness:
10mm
Chemical
Resistant:
yes
Full Cure:
Chemical Base:
Thermoplastic
Cure Mechanism:
Tear Propagation
Resistance:
15.40 mPA
Service
Temperature:
-20°C to 50°C
Solid Contents:
100%
Bond Strength:
Density:
Shore A 75
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
100m2
Based on a manufacturers average recommended coverage of 250mm x 12.5m, 150mm x 15m
Required:
NaN Lr
3d
Application Model
Available in (sizes)
250mm x 12.5m, 150mm x 15m
PREBAR PVC WATERSTOP GALLERY
bottom of page