ACTFLEX SuperBond 007 PVC
Fast Bond Promotion
Moisture-reactive solvent-based primer for enhancing adhesion
ACTFLEX SUPERBOND 007 is a highly versatile PVC primer specifically formulated for waterproofing applications. With an impressive drying time of just 30 seconds, it provides a quick and effective solution for bonding PVC materials. This primer is suitable for a wide range of surfaces, including PVC, glass, aluminium, metal, timber, concrete, and other non-porous materials.
specs
Technical Specifications.
Waterproof Time:
Coverage:
Thin film application (substrate dependent)
Usable period after opening:
After tack free (3–5 minutes @ 23°C)
Touch dry time minimum:
Tack Free: 3–5 minutes @ 23°C
Vapor Pressure @ 25oC:
Not a vapour barrier
Application Temperature:
5 - 35°C
Shelf Life:
12 months
Membrane
Classification:
N/A
Colour:
Clear
Tack Free Time:
3–5 minutes
Recoat Time:
Apply PU sealant once primer flashes off
Elongation at Break:
Recommended
Thickness:
Single thin coat only
Chemical
Resistant:
Designed as adhesion promoter only
Full Cure:
Moisture reactive thin bonding layer
Chemical Base:
Solvent-based polyurethane solution
Cure Mechanism:
Moisture reactive
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
30%
Bond Strength:
Enhances PU sealant adhesion
Density:
Approx. 0.9 g/cm³
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Low viscosity liquid
Dimensional Stability:
Low viscosity liquid
Control Elongation at Break:
Low viscosity liquid
Control Tensile Strength:
Low viscosity liquid
Water Immersion Elongation at Break:
Low viscosity liquid
Water Immersion Tensile Strength:
Low viscosity liquid
Detergent Immersion Elongation at Break:
Low viscosity liquid
Detergent Immersion Tensile Strength:
Low viscosity liquid
Heat Aging Elongation at Break:
Low viscosity liquid
Heat Aging Tensile Strength:
Low viscosity liquid
Field Seam Strength:
Low viscosity liquid
Temperature Resistance:
Water Vapour Transmission
Low viscosity liquid
Water Vapour Transmission:
Low viscosity liquid
Application Method:
Low viscosity liquid
VOC Content:
Low viscosity liquid
Mixing Ratio:
Low viscosity liquid
Viscosity:
Low viscosity liquid
Storage Temperature:
Low viscosity liquid
Flash Point:
Low viscosity liquid
UV Resistance:
Low viscosity liquid
Hydrostatic Pressure Resistance:
Low viscosity liquid
Water Vapour Transmission Rate (WVTR):
Low viscosity liquid
Abrasion Resistance:
Low viscosity liquid
Bacterial/Algae Resistance:
Low viscosity liquid
Application Time:
Low viscosity liquid
Environmental Impact:
Low viscosity liquid
Packaging Sizes:
Low viscosity liquid
Hardness:
Low viscosity liquid
Adhesion to Substrate:
Low viscosity liquid
Appearance After Curing:
Low viscosity liquid
Clean-up Requirements:
Low viscosity liquid
Certification Standards:
Low viscosity liquid
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Thin film application (substrate dependent)
Required:
NaN Lr
3d
Application Model
