top of page

ACTFLEX SUPERPRIME 008

​

Three-Chemistry | Dry in 5–15 Minutes | Extended Open Time

Moisture-reactive hybrid primer that forms a chemical bonding layer on metals, glass, ceramics and dense concrete.

ACTFLEX SUPERPRIME 008 is the specified primer for ACTFLEX MS PRO on non-porous, timber and PVC substrates, and is approved ahead of ACTFLEX 906 WPU, ACTFLEX 929 SL and ACTFLEX 75FC. It suits smooth facade cladding, glazed surfaces, tile and stone preparation, balconies, wet areas and expansion joints. Tack-free in 2–4 minutes yet open for overcoating for up to 4 hours, it lets detailing and sealing proceed in the same visit. A single thin coat covers 8–12 m²/L on non-porous surfaces, and over-application weakens the bond. Patch test first. Not a membrane or moisture barrier; do not apply on wet surfaces or in high humidity.

specs

Technical Specifications.

Waterproof Time:

Not a waterproofing membrane and not a moisture barrier.

Coverage:

8–12 m²/L non-porous; 6–10 m²/L dense concrete

Usable period after opening:

One month frequent use; two months infrequent use

Touch dry time minimum:

Tack-free: 2–4 min; fully dry: 5–15 min at 25°C, 50% RH

Vapour Pressure @ 25°C:

​

Application Temperature:

+5°C to +35°C

Shelf Life:

12 months, unopened, stored at 10–22°C

Membrane
Classification:

​

Colour:

Clear to slightly yellow

Tack Free Time:

2–4 min at 25°C, 50% RH

Recoat Time:

Dry 5–15 min; overcoat ≤4 h

Elongation at Break:

​

Recommended
Thickness:

Thin film only (avoid over-application)

Chemical
Resistant:

​

Full Cure:

​

Chemical Base:

Solvent-based silane-modified polymer hybrid

Cure Mechanism:

Moisture reactive

Tear Propagation
Resistance:

​

Service
Temperature:

​

Solids Content:

28%

Bond Strength:

​

Density:

Approx. 0.88 g/cm³

Compressive
Strength:

​

Flow:

​

Acceptance of Cyclic Movement:

​

Dimensional Stability:

​

Control Elongation at Break:

​

Control Tensile Strength:

​

Water Immersion Elongation at Break:

​

Water Immersion Tensile Strength:

​

Detergent Immersion Elongation at Break:

​

Detergent Immersion Tensile Strength:

​

Heat Aging Elongation at Break:

​

Heat Aging Tensile Strength:

​

Field Seam Strength:

​

Temperature Resistance:
Water Vapour Transmission

​

Water Vapour Transmission:

​

Application Method:

​

VOC Content:

​

Mixing Ratio:

​

Viscosity:

​

Storage Temperature:

​

Flash Point:

​

UV Resistance:

​

Hydrostatic Pressure Resistance:

​

Water Vapour Transmission Rate (WVTR):

​

Abrasion Resistance:

​

Bacterial/Algae Resistance:

​

Application Time:

​

Environmental Impact:

​

Packaging Sizes:

​

Hardness:

​

Adhesion to Substrate:

​

Appearance After Curing:

​

Clean-up Requirements:

​

Certification Standards:

​

calculator

Coverage Calculator.

100m2

Based on a manufacturers average recommended coverage of 8–12 m²/L non-porous; 6–10 m²/L dense concrete

Required:

10 L

pdfs

Product Documentation.

Technical Data Sheet (PDF Download)

Safety Data Sheet 1 (PDF Download)

Safety Data Sheet 2 (PDF Download)

Compliance Testing Report 1 (PDF Download)

Compliance Testing Report 2 (PDF Download)

Compliance Testing Report 3 (PDF Download)

Low VOC Certificate (PDF Download)

Product How To Guide (PDF Download)

Technical Drawings (PDF Download)

3d

Application Model

ACTFLEX SUPERPRIME 008

locate

Find a Stockist Near You

Company Name

Distance

Address

Phone

ACTFLEX SUPERPRIME 008

Available in (sizes)

1000 mL

Need to Know More?

I am a…

Got a question about ACTFLEX SUPERPRIME 008? Our technical team can help with specification, surface prep, coverage and compatibility.

Call (02) 8021 3517
Email info@forspec.com.au

ACTFLEX SUPERPRIME 008 GALLERY

bottom of page