top of page
POLYFIN 100MM PIPE FLANGE
Polyfin 100mm Flange
prefabricated waterproof pipe flange designed to integrate with Polyfin waterproofing membranes at roof penetrations and drainage systems.
POLYFIN 100MM PIPE FLANGE is a prefabricated waterproof pipe flange designed to integrate with Polyfin waterproofing membranes at roof penetrations and drainage systems. The flange is installed vertically and hot-air welded directly to the Polyfin membrane to create a secure, consistent and watertight connection around the pipe penetration. It helps reduce on-site fabrication errors and minimise leakage risks at critical penetration points.
specs
Technical Specifications.
Waterproof Time:
Coverage:
One flange per 100 mm pipe penetration.
Usable period after opening:
Touch dry time minimum:
Vapor Pressure @ 25oC:
Application Temperature:
Shelf Life:
Membrane
Classification:
Colour:
Grey
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Chemical
Resistant:
Full Cure:
Chemical Base:
PVC-coated component
Cure Mechanism:
Hot-air welded directly to Polyfin membrane
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
Bond Strength:
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
100m2
Based on a manufacturers average recommended coverage of One flange per 100 mm pipe penetration.
Required:
NaN Lr
3d
Application Model
Available in (sizes)
100mm pipe
POLYFIN 100MM PIPE FLANGE GALLERY
bottom of page