top of page

POLYFIN PVC-Coated External Angle Bar 40 x 40mm – 2m Length

​

40x40 External Angle | Terminations | Vertical Or Horizontal

Preformed PVC-coated angle that turns POLYFIN membrane transitions into a ready-made detail instead of hand-formed work.

The POLYFIN PVC-Coated External Angle Bar 40 x 40mm provides a durable, factory-preformed solution for external waterproofing transitions and membrane junctions.

It hot-air welds directly to the ACTFLEX POLYFIN membrane using approved welding equipment, creating a heat-fused connection without relying on adhesives that may age, creep or debond. Welds can be probe-tested to verify continuity before handover.

Ideal for balconies and podiums, rooftops and parapets, planter boxes, wet areas and bathrooms, window and façade junctions, and membrane joints and repairs.

Factory prefabrication ensures consistent profiles, speeds up installation and reduces on-site labour compared with forming angles by hand.

For compact window and façade details where space is limited, the slimline POLYFIN 15 x 40mm External Angle Bar is an alternative.

Important compatibility note: Avoid direct contact with bituminous products unless a suitable separation layer is installed.

Product length: 2 metres (2m) per piece.

specs

Technical Specifications.

Waterproof Time:

​

Coverage:

Measured according to the required length of external waterproofing transitions and membrane terminations.

Usable period after opening:

​

Touch dry time minimum:

​

Vapour Pressure @ 25°C:

​

Application Temperature:

​

Shelf Life:

​

Membrane
Classification:

​

Colour:

​

Tack Free Time:

​

Recoat Time:

​

Elongation at Break:

​

Recommended
Thickness:

​

Chemical
Resistant:

​

Full Cure:

​

Chemical Base:

PVC-coated component

Cure Mechanism:

​

Tear Propagation
Resistance:

​

Service
Temperature:

​

Solids Content:

​

Bond Strength:

​

Density:

​

Compressive
Strength:

​

Flow:

​

Acceptance of Cyclic Movement:

​

Dimensional Stability:

​

Control Elongation at Break:

​

Control Tensile Strength:

​

Water Immersion Elongation at Break:

​

Water Immersion Tensile Strength:

​

Detergent Immersion Elongation at Break:

​

Detergent Immersion Tensile Strength:

​

Heat Aging Elongation at Break:

​

Heat Aging Tensile Strength:

​

Field Seam Strength:

​

Temperature Resistance:
Water Vapour Transmission

​

Water Vapour Transmission:

​

Application Method:

​

VOC Content:

​

Mixing Ratio:

​

Viscosity:

​

Storage Temperature:

​

Flash Point:

​

UV Resistance:

​

Hydrostatic Pressure Resistance:

​

Water Vapour Transmission Rate (WVTR):

​

Abrasion Resistance:

​

Bacterial/Algae Resistance:

​

Application Time:

​

Environmental Impact:

​

Packaging Sizes:

​

Hardness:

​

Adhesion to Substrate:

​

Appearance After Curing:

​

Clean-up Requirements:

​

Certification Standards:

​

calculator

Coverage Calculator.

100m2

Based on a manufacturers average recommended coverage of Measured according to the required length of external waterproofing transitions and membrane terminations.

Required:

NaN

pdfs

Product Documentation.

Technical Data Sheet (PDF Download)

Safety Data Sheet 1 (PDF Download)

Safety Data Sheet 2 (PDF Download)

Compliance Testing Report 1 (PDF Download)

Compliance Testing Report 2 (PDF Download)

Compliance Testing Report 3 (PDF Download)

Low VOC Certificate (PDF Download)

Product How To Guide (PDF Download)

Technical Drawings (PDF Download)

3d

Application Model

POLYFIN PVC-Coated External Angle Bar 40 x 40mm – 2m Length

locate

Find a Stockist Near You

Company Name

Distance

Address

Phone

POLYFIN PVC-Coated External Angle Bar 40 x 40mm – 2m Length

Available in (sizes)

40 mm × 40 mm

Need to Know More?

I am a…

Got a question about POLYFIN PVC-Coated External Angle Bar 40 x 40mm – 2m Length? Our technical team can help with specification, surface prep, coverage and compatibility.

Call (02) 8021 3517
Email info@forspec.com.au

POLYFIN PVC-Coated External Angle Bar 40 x 40mm – 2m Length GALLERY

bottom of page