POLYFIN PVC COATED BAR INTERNAL 40x40
POLYFIN PVC COATED BAR INTERNAL 40x40
Preformed PVC-coated internal angle designed for internal wall-to-floor waterproofing transitions
POLYFIN PVC COATED BAR INTERNAL 40x40 is a preformed PVC-coated internal angle designed for internal wall-to-floor waterproofing transitions. It may be installed in vertical or horizontal orientations and is hot-air welded directly to the Polyfin membrane using approved welding equipment. It is suitable for balconies, podiums, rooftops, parapets, planter boxes, wet areas, bathrooms, window and façade junctions, and membrane joints and repairs.
specs
Technical Specifications.
Waterproof Time:
Coverage:
Measured according to the required length of internal wall-to-floor waterproofing transitions.
Usable period after opening:
Touch dry time minimum:
Vapor Pressure @ 25oC:
Application Temperature:
Shelf Life:
Membrane
Classification:
Colour:
Grey
Tack Free Time:
Recoat Time:
Elongation at Break:
Recommended
Thickness:
Chemical
Resistant:
Full Cure:
Chemical Base:
PVC-coated component
Cure Mechanism:
Hot-air welded directly to Polyfin membrane
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
Bond Strength:
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Dimensional Stability:
Control Elongation at Break:
Control Tensile Strength:
Water Immersion Elongation at Break:
Water Immersion Tensile Strength:
Detergent Immersion Elongation at Break:
Detergent Immersion Tensile Strength:
Heat Aging Elongation at Break:
Heat Aging Tensile Strength:
Field Seam Strength:
Temperature Resistance:
Water Vapour Transmission
Water Vapour Transmission:
Application Method:
VOC Content:
Mixing Ratio:
Viscosity:
Storage Temperature:
Flash Point:
UV Resistance:
Hydrostatic Pressure Resistance:
Water Vapour Transmission Rate (WVTR):
Abrasion Resistance:
Bacterial/Algae Resistance:
Application Time:
Environmental Impact:
Packaging Sizes:
Hardness:
Adhesion to Substrate:
Appearance After Curing:
Clean-up Requirements:
Certification Standards:
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of Measured according to the required length of internal wall-to-floor waterproofing transitions.
Required:
NaN Lr
3d
Application Model
