ACTFLEX DENSIFIER
Concrete Strength & Durability
penetrates deep into concrete, reacting with free lime to form C-S-H gel
ACTFLEX DENSIFIER, powered by innovative particles meticulously treated with silane, revolutionizes concrete surface enhancement. This advanced solution easily permeates the surface, reaching profound depths and interacting directly with free-lime. The result is the rapid formation of pure calcium silicate hydrate (C-S-H) gels, significantly improving strength, durability, and impermeability.
specs
Technical Specifications.
Waterproof Time:
Coverage:
6-10sqm per Litre
Usable period after opening:
24 hours
Touch dry time minimum:
1-2 hours (touch dry), full cure in 7 days
Vapor Pressure @ 25oC:
Application Temperature:
10°C to 30°C
Shelf Life:
12 months
Membrane
Classification:
Colour:
Clear
Tack Free Time:
1-2 hours
Recoat Time:
24 hours
Elongation at Break:
Recommended
Thickness:
0.1 to 0.2 mm
Chemical
Resistant:
Full Cure:
7 days
Chemical Base:
Water-based
Cure Mechanism:
Chemical reaction with free-lime in concrete
Tear Propagation
Resistance:
Service
Temperature:
-10°C to 65°C
Solid Contents:
20-30%
Bond Strength:
Density:
1.2 – 1.4 g/L
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Low viscosity
Dimensional Stability:
Low viscosity
Control Elongation at Break:
Low viscosity
Control Tensile Strength:
Low viscosity
Water Immersion Elongation at Break:
Low viscosity
Water Immersion Tensile Strength:
Low viscosity
Detergent Immersion Elongation at Break:
Low viscosity
Detergent Immersion Tensile Strength:
Low viscosity
Heat Aging Elongation at Break:
Low viscosity
Heat Aging Tensile Strength:
Low viscosity
Field Seam Strength:
Low viscosity
Temperature Resistance:
Water Vapour Transmission
Low viscosity
Water Vapour Transmission:
Low viscosity
Application Method:
Low viscosity
VOC Content:
Low viscosity
Mixing Ratio:
Low viscosity
Viscosity:
Low viscosity
Storage Temperature:
Low viscosity
Flash Point:
Low viscosity
UV Resistance:
Low viscosity
Hydrostatic Pressure Resistance:
Low viscosity
Water Vapour Transmission Rate (WVTR):
Low viscosity
Abrasion Resistance:
Low viscosity
Bacterial/Algae Resistance:
Low viscosity
Application Time:
Low viscosity
Environmental Impact:
Low viscosity
Packaging Sizes:
Low viscosity
Hardness:
Low viscosity
Adhesion to Substrate:
Low viscosity
Appearance After Curing:
Low viscosity
Clean-up Requirements:
Low viscosity
Certification Standards:
Low viscosity
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of 6-10sqm per Litre
Required:
17 Lr
3d
Application Model
