ACTFLEX ULTRA TC 40KG KIT
2 Component Polyurethane UV Stable Top Coat
UV-stable 2-component polyurethane topcoat for exposed waterproofing systems.
ACTFLEX ULTRA TC is a high-performance UV-stable polyurethane topcoat designed to protect exposed waterproofing membranes from UV degradation, abrasion, weathering, and surface wear. It provides a seamless, flexible, chemically resistant, and trafficable finish for balconies, terraces, podiums, rooftops, walkways, and exposed membrane systems.
specs
Technical Specifications.
Waterproof Time:
Coverage:
UV Protective Topcoat: 0.6 mm
Usable period after opening:
40 minutes
Touch dry time minimum:
12 hours
Vapor Pressure @ 25oC:
Application Temperature:
5°C – 30°C
Shelf Life:
12 months
Membrane
Classification:
Polyurethane UV Stable Topcoat
Colour:
Custom colours available on request
Tack Free Time:
5 hours
Recoat Time:
Minimum: 6–12 hours
Maximum: 24 hours
Elongation at Break:
450%
Recommended
Thickness:
0.6 mm recommended topcoat
1.2 mm standalone trafficable system
Chemical
Resistant:
High chemical resistance
Full Cure:
7 days
Chemical Base:
Polyurethane
Cure Mechanism:
2-component chemical cure
Tear Propagation
Resistance:
Service
Temperature:
Solid Contents:
100%
Bond Strength:
1.5 MPa
Density:
Compressive
Strength:
Flow:
Acceptance of Cyclic Movement:
Excellent thixotropy not specified for flow value
Dimensional Stability:
Excellent thixotropy not specified for flow value
Control Elongation at Break:
Excellent thixotropy not specified for flow value
Control Tensile Strength:
Excellent thixotropy not specified for flow value
Water Immersion Elongation at Break:
Excellent thixotropy not specified for flow value
Water Immersion Tensile Strength:
Excellent thixotropy not specified for flow value
Detergent Immersion Elongation at Break:
Excellent thixotropy not specified for flow value
Detergent Immersion Tensile Strength:
Excellent thixotropy not specified for flow value
Heat Aging Elongation at Break:
Excellent thixotropy not specified for flow value
Heat Aging Tensile Strength:
Excellent thixotropy not specified for flow value
Field Seam Strength:
Excellent thixotropy not specified for flow value
Temperature Resistance:
Water Vapour Transmission
Excellent thixotropy not specified for flow value
Water Vapour Transmission:
Excellent thixotropy not specified for flow value
Application Method:
Excellent thixotropy not specified for flow value
VOC Content:
Excellent thixotropy not specified for flow value
Mixing Ratio:
Excellent thixotropy not specified for flow value
Viscosity:
Excellent thixotropy not specified for flow value
Storage Temperature:
Excellent thixotropy not specified for flow value
Flash Point:
Excellent thixotropy not specified for flow value
UV Resistance:
Excellent thixotropy not specified for flow value
Hydrostatic Pressure Resistance:
Excellent thixotropy not specified for flow value
Water Vapour Transmission Rate (WVTR):
Excellent thixotropy not specified for flow value
Abrasion Resistance:
Excellent thixotropy not specified for flow value
Bacterial/Algae Resistance:
Excellent thixotropy not specified for flow value
Application Time:
Excellent thixotropy not specified for flow value
Environmental Impact:
Excellent thixotropy not specified for flow value
Packaging Sizes:
Excellent thixotropy not specified for flow value
Hardness:
Excellent thixotropy not specified for flow value
Adhesion to Substrate:
Excellent thixotropy not specified for flow value
Appearance After Curing:
Excellent thixotropy not specified for flow value
Clean-up Requirements:
Excellent thixotropy not specified for flow value
Certification Standards:
Excellent thixotropy not specified for flow value
calculator
Coverage Calculator.
Based on a manufacturers average recommended coverage of UV Protective Topcoat: 0.6 mm
Required:
NaN Lr
3d
Application Model
_edited.png)